Specifications of an Optical Drive

Various types of optical drives are available in the market. These include CD readers, CD writers, DVD readers, DVD writers, DVD combos, BD readers, BD writers and BD combos.

The specifications of an Optical Drive drives to be considered are:

Supported Media Types: The optical drive must support a major part of available types of discs in the market. Examples are CD-ROM ,

DVD-R ,DVD-ROM ,CD-RW ,CD-R ,DVD-RAM ,DVD-RW ,DVD+R and DVD+RW. Note that CD drives do not support DVD's or BD's and DVD drives do not support BD's. Also, the supported media types are different for a drive's read and write capabilities.

Interface: The interface that an optical drive uses and the port that it will use to connect to the system. The interfaces have transfer speeds of their own. For example, a max. of 167 MBps for IDE, 600 MBps for SATA. But, the current technologies available for optical drives can only provide speeds that are lower than modern systems. So in case, both the ports are available in your system, the interface is not much of a specification.

Buffer Size: The optical drive buffer works in exactly the same manner as the cache of a hard drive It stores a fraction of frequently accessed data that can be accessed extremely fast. It helps the system to access data from the drive even if the processor is being utilized 100% by other processes for a fraction of a second. Usually 1 or 2 or 4 MB.

Read & Write Speeds: All optical drives have different read and write speeds and different read or write speeds for different types of media. For example, DVD drives have a speed of 16x, 20x, 24x (where x is 1.35 MBps) and CD drives have a speed of 32x, 48x, 52x (where x is 150 KBps). An optical drive will always write different types of media at different speeds (For example, a CD at 48x, a DVD at 16x and a re-writable DVD at 4x).